This is a demo store. No orders will be fulfilled.
Raychem 3-Watt WinterGard Heating Cables 120V Self-Regulating Pipe Freeze Protection. 100 & 250 Foot Reels
- AMC-1A Ambient-Sensing ThermostatRaychem (nVent) 573977-000 Ambient 15-140F Adjustable Setpoint Pipe Freeze Protection Thermostat controls heat tracing systems - NEMA 4X enclosure - UL Listed and CSA Approved - 22 A at 125 / 250 / 480 Vac - Part #: 573977-000
RAYCHEM715629007193
- AMC-F5 Fixed Set Point ThermostatRaychem (nVent) 031661-000 Fixed Set Point Freeze-Protection Thermostat - 40F Fixed Set Point - NEMA 4X enclosure - UL Listed - CSA Approved - 22 Amp at 125/25/480 VAC - Part #: 031661-000
RAYCHEM10140
- H311100 100ft TruckPak 120V WinterGardRaychem (nVent) 144941-000 3 Watts/foot WinterGard Self-Regulating Pipe Freeze Protection Heating Cable - 120 Volt - Includes 100 feet of Cable - 2 each H900 Power/End Seal Kits - 1 each H910 Splice/Tee Kit - 1 each H903 Application Tape
RAYCHEM10012
- H311250 250ft Reel 120V WinterGardRaychem (nVent) 064721-000 3 Watts/foot WinterGard Self-Regulating Pipe Freeze Protection Heating Cable - 120 Volt - Part #: 064721-000
RAYCHEM10013
- H900 Power Connection Kit (Hardwired)Raychem (nVent) 396537-000 for Pipe Freeze Protection and Roof and Gutter De-Icing - This kit is for use with the following WinterGard heating cables: H311, H611, H612, H621, and H622. Materials for one power connection and one end seal are included
RAYCHEM10030
- H903 Application Tape & LabelsRaychem (nVent) 586649-000 - Contains one roll of application tape and ten Electric Traced labels - The application tape is a 66 Ft long roll that is used to attach heating cables to pipes - Part #: 586649-000
RAYCHEM10031
- H908 Plug-In Cord Set w/GFIRaychem (nVent) 893515-000 - The H908 is a plug-in, ground-fault-protected power connection kit with End Seal for use with WinterGard H311, WinterGard Plus H611,and WinterGard Wet H612 120 Volt heating cables. 15A - Part #: 893515-000
RAYCHEM10032
- H910 Splice & Tee Kit (waterproof)Raychem (nVent) 217793-000 - H910 Splice and Tee Kit is for use with WinterGard self-regulating heating cables to make splice, tee, and end seal connections. - Part #: 217793-000
RAYCHEM10033
- H912 Gel-Filled End Seal Kit (2 ea)Raychem (nVent) 763791-000 - Gel filled end seal kit available for use with all WinterGard heating cables - Each kit includes two end seals - Part #: 763791-000
RAYCHEM10034
Saved Products
Last Added Items
You have no items in your list.
